Aten Usb To Serial Bridge Driver Windows 10

Vanavil font download. PLEASE NOTE - When updating drivers, refer to the following document: AN_107 - Advanced Driver Options

1. Aten Usb To Serial Bridge
2. Aten Usb To Serial Controller D Driver

Intelectron motion detector security light manual. New drivers are now available to support the FT4222H - for D2XX drivers please click here.

Welcome to UC232A USB Converter: Notice: Before downloading the software, be sure to read the following information carefully. This latest version is cumulative and includes the corrections contained in all previous revisions. There is no need to install previous version if you are installing this one. Usually, Windows 7, 8 and Windows 10 will automatically install the ATEN USB-to-Serial driver v3.3.7.131 (or 3.4.62.295). This article describes the procedure for downloading and installing version 3.3.3.131 (or 3.4.62.295) of the Bridgemate Pro server USB-serial converter for 64-bit versions of Windows Vista, Windows 7, 8, 8.1 and 10.

Drivers Installer for ATEN USB to Serial Bridge (COM4) If you don't want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link. All systems Windows 10 x64 Windows 10 x86 Windows 8.1 x64 Windows 8.1 x86 Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 Windows XP x86 ATEN USB to Serial Bridge 2.0.0.18 ( ) Download driver. For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. Ginger grammer check. The D2XX driver allows direct access to a USB device via a DLL interface.

Drivers are available which allow FTDI devices to work with the following operating systems:

Windows Certified	Others	Legacy
Windows 10 (32/64)	Linux	Windows Vista (32/64)
Windows 8.1 (32/64)	MAC OSX	Windows XP (32/64)
Windows 8 (32/64)	Windows CE (Version 4.2 and greater)	Windows 2000
Windows 7 (32/64)	Windows RT	Windows ME
Windows Server 2016	Android	Windows 98
Windows Server 2012 R2 x64	MAC OS9
Windows Server 2008 R2 x64	MAC OS8

Support for WinCE
FTDI drivers are available for Windows CE 4.2-5.2, 6.0/7.0 and 2013.

Support for older versions of Windows Desktop

NOTE: Microsoft have ended support for certifying XP and VISTA through their WHCK test program. From revision 2.12.24 with Device Guard Support, the driver will not load on XP or VISTA.

Differences in Driver API

For most of these operating systems two types of driver are available: Virtual COM Port (VCP) drivers and direct (D2XX) drivers. The VCP driver emulates a standard PC serial port such that the USB device may be communicated with as a standard RS232 device. The D2XX driver allows direct access to a USB device via a DLL interface.

To locate the drivers you want to install for a device, select which of the driver types you wish to use (VCPor D2XX) and then locate the appropriate operating systems. With the exception of Windows 98 and Windows ME, all devices are supported in each driver package.

If a VCP driver is required for Android please refer to the following application note: TN 132 Adding FTDI Devices VCP Driver Support to Android

D3XX

D3XX drivers are only suitable for FTDI's Superspeed USB bridge services (e.g. FT60x series).

Contacting Technical Support

For technical queries relating to drivers or any of our other products or services, please send an email to our Customer Engineering Support team in your region:

EMEAAmericasAsia Pacific (Taiwan office)Asia Pacific (China office)

Alternatively, please click here to access the list of regional office telephone numbers if you wish to call one of the regional support teams directly.

This article describes the procedure for downloading and installing version 3.1.0.0 of the Bridgemate Pro server USB-serial converter for 64-bit versions of Windows 7 and Windows 8.

Introduction

Version 3.1.0.0 of the Aten USB-serial converter driver has been tested successfully on 64-bits version of Microsoft Windows 7, Windows 8 and Windows 8.1.

Note:

Only install this driver when you connect the Bridgemate Pro server to a USB port using the 'Aten USB-serial converter' which is supplied with the Bridgemate Pro server. If the Bridgemate Pro server uses a direct serial connection port or a USB-serial converter of another brand, do not use this driver.

IMPORTANT:

This driver should only be used on 64-bit versions of Windows 7, Windows 8 or Windows 8.1. On 32-bit operating systems, use the 32-bit driver instead. For Windows 10 64-bit, use this driver.

Procedure

In case a driver is already installed, you should uninstall the current driver first.

How to uninstall the current driver:

Aten Usb To Serial Bridge

1. Make sure the Aten USB to Serial converter is connected to one of the USB ports of your computer.
2. Click on Windows Start.
3. Right-mouse cllick on 'My Computer' or 'Computer'.
4. Click 'Properties'.
5. Click on 'Device Manager' in section 'Tasks' (Windows 7)
6. Double-click on 'Ports (COM & LPT)'.
7. Right-mouse click on 'USB to serial bridge' (the name may be slightly different depending on the current driver version), then click 'Uninstall'.
8. In case an option 'Delete the driver software for this device' is shown, check this option. Next, click OK to confirm the uninstall of the driver.
9. The driver will now be un-installed.
10. Remove the USB converter from the USB port.

Aten Usb To Serial Controller D Driver

Install the 64-bits driver:

1. Make sure the Aten USB to Serial converter is NOT connected to the computer.
2. Download the file UC232A_V31_64bits.exe
3. Open the downloaded file and follow the instructions on the screen. The driver will now be installed.
4. After the installation has completed, connect the USB to Serial converter to a USB port of your computer. The converter will automatically be recognized and is ready to use. You can now connect your Bridgemate Pro server through the converter.

Additional information

There is no additional information available for this article.

See also

Update history

22-10-2013 - Article published